待补充:推拉、抬升、停止和关闭的真实视频。

Products / Panoramic sliding door systems

Panoramic Sliding Door Systems

Choose a starting system direction from the internal-clear series reference, then confirm glass, tracks, threshold, hardware and site conditions with YIXIN engineering.

Three starting directions

Choose the series after the opening is understood.

120, 150 and 181 are YIXIN internal-clear series references. They are a starting point for the project conversation, not a substitute for a checked opening, glass weight and installation review.

Series comparison

Use concrete references to choose what to review first.

The table gives a starting profile class, sash size, load and glazing range for each series. These are comparable-system industry references; YIXIN confirms the final section and tested configuration before production.

SeriesInternal-clear series referenceOpening directionOperating conceptTrack / stackingStandard configurationTypical application
120 Series120 SeriesCompact panoramic openingsThermal-break lift-and-slide; manual operation standard, motorised optional2-track / 3-panel standard; 3-track option2-track / 3-panel · 6+16A+6 IGU · low threshold · manual standard
120 mm frame class · 2.5 x 3.0 m sash · 320 kg · 26-30 mm glazing · 6+16A+6 IGU
Villas, apartments, terraces and compact hospitality openings
150 Series150 SeriesBroader residential and hospitality openingsThermal-break lift-and-slide; manual operation standard, motorised optional3-track / 3- or 4-panel standard; 4-track option3-track / 3-panel · 8+16A+8 IGU · low threshold · motorised optional
150 mm frame class · 3.5 x 3.5 m sash · 500 kg · 28-44 mm glazing · 8+16A+8 IGU
Large villa living spaces, pool-facing terraces and boutique hospitality
181 Series181 SeriesLarge-format feature openingsThermal-break lift-and-slide; motorised hardware starting package4-track / 4-panel standard; bi-parting or corner layout by review4-track / 4-panel · 10+16A+10 laminated IGU · flush threshold · motorised
181 mm frame class · 4.0 x 4.0 m sash · 400 kg manual / 700 kg motorised · 36-56 mm glazing · 10+16A+10 laminated IGU
Double-height rooms, hotel lobbies and selected architectural openings

The reference ranges are based on public comparable lift-and-slide systems. Use them to shortlist a series; confirm the YIXIN profile drawing, hardware, glass and test report before quotation.

Common system architecture

Every panoramic opening needs more than a frame number.

These are the technical points a distributor, designer and installer should review together before a quote is finalized.

Frame and sash

Confirm the frame depth, sash construction, glass pocket and visible interlock after the opening and glass direction are known.

Glass build-up

Select glass for safety, insulation, wind exposure and sash weight. The glass value is project-dependent until YIXIN engineering confirms it.

Rollers and lift mechanism

Review the operating concept, roller capacity, adjustment access and the hardware package against the final panel weight.

Tracks and stacking

Define the number of tracks, fixed and sliding panels, stacking direction and any corner or pocket condition.

Threshold and drainage

Confirm the floor interface, level-threshold requirement, sill depth, drainage direction and waterproofing interface.

Locking and finish

Coordinate locking points, handles, gaskets, colour, surface treatment and the installation handover scope.

Product and project evidence

See the door in place and up close.

Review the installed opening, frame and threshold details, and the clear passage between stacked panels.

Installed result

Review the door in a complete opening, from the room and the exterior.

待补充:从室内正面拍全景推拉门的完整安装效果,同框展示门洞、门扇和相邻空间。

Interior project view

待补充:全景推拉门室外立面或露台视角,拍出完整门洞与建筑的关系。

Exterior or terrace view

System details

Inspect the meeting frame, track and floor interface before specifying the layout.

待补充:轨道、门槛、滑轮或锁点的真实细节图。

Frame and interlock

待补充:真实门槛和轨道近景,拍清轨道层数、地面接口及排水位置。

Track and threshold

Operation detail

See how the panels stack and how much of the passage stays open.

待补充:从室内拍门扇半开状态,展示门扇叠合、停靠位置和实际通行开口;不要重复轨道特写。

Panel stacking and clear passage

How to choose

Send the information that changes the recommendation.

A short project brief lets YIXIN review series direction before preparing a detailed quotation.

01

Measure the clear opening

Send clear width, clear height, panel count and a photo or drawing of the sill and structural support.

02

Set the glass direction

State the glass build-up, safety requirement, insulation priority and site exposure so sash weight can be reviewed.

03

Choose the movement

Confirm lift-and-slide or project-selected sliding hardware, track count, stacking direction and threshold preference.

04

Prepare installation information

Add destination country, access route, installation responsibility, commissioning plan and target delivery date.

Panoramic sliding door project review

Start with the opening, the glass and the movement.

Send a drawing, a rough dimension or a site photo. YIXIN can then confirm which series should be reviewed first.

Request a Project Quote